Nazca JR Custom Fountain Pen - in Orange Crush Acrylic.

(Click each photo for larger views)

Orange Crush Nazca JR (capped) Orange Crush Nazca JR (uncapped) Orange Crush Nazca JR (close-up) Orange Crush Nazca JR (size comparison)


bout the Nazca JR:
The JR is a smaller downsized version of the NAZCA, so it carries the same name as its full size parent. The Nazca is named after the flat-top mountains of the Nazca Valley in Peru. Although Nazca is actually the name of the VALLEY rather than the mountains, I thought it an appropriate name for this "Flat-Top" style pen. Historical buffs and Sci-Fi fans will know of the famous Nazca "Lines" found scattered across the tops of the flat mountains, as well as the many odd shaped skulls found in the region with the elongated craniums. So the exceptionally tall finial on this pen is a reference to the famous skulls, while the upgraded rings on the finial pays homage to the lines.

Nazca JR Dimensions:
The Nazca JR has an overall length of 5" to 5 5/8". The final overall length will depend on the height chosen for the finial. While the main feature of the full size Nazca is its tall finial, the JR's finial is typically shorter (I think the JR looks better with a shorter finial, but it can be ordered with one sized comparably to the full size version). The JR also has slightly smaller diameter threads (13mm instead of 14mm), as well as a smaller clip. The standard JR uses a #5 nib, but you can upgrade your pen with a larger #6 (see below for available tip sizes and finishes).

As with all other JEB's PENs, the Nazca can be ordered in any of the materials shown or you can choose your own material to make the pen unique (if you email me I can send links for you to review the material available). The pen can be ordered with or without a clip. Finishes available for the standard JR clip are nickel and 24k gold. However you can also choose one of the other clips styles if you don't care for the stock clip (as long as the clip's ring is size compatible). The Nazca JR uses a Cartridge/Converter (C/C) inking system, or can be upgrade to a button filler (I'm also working on piston and lever fillers that I eventually hope to offer). If you prefer eyedroppers, the pen could also be ordered with a special rubber o-ring that would seal the section to the barrel so the barrel can be filled directly with ink. Nib finishes available are 2-tone, polished steel, Black Oxide (#6 only), or Ruthenium (#5 only). Current tip sizes are fine, medium, broad, and italic and 1.1 and 1.4 (#5 only) or 1.5 (#6 only).

Nazca Options and Upgrades:
Like it's parent, the Nazca JR could also be ordered with metal accent bands at various locations. You can add just one to the rear of the section for just a little touch of flash, or add one at the end of the barrel (using a threaded blind-cap). The cap posting shown on some pens is also an upgrade, so if you prefer to post your cap, please be sure to let me know so this can be added to your pen while I'm turning the barrel.

I also offer a variety of hand-made Pen Props and Pen Buttons. You can order a Pen Prop in a material to match your pen, or any one of the wooden styles made in a variety of stained and dyed colors. The Pen Buttons are available for any of the clipless pens.

About this Pen and Material:

This material is an Acrylic Acetate called "Orange Crush". As you can see, it's so called because of the color and pattern. The pattern is called CRUSH because it's made up of small "crushed" pieces of acrylic. It's made by first making a batch of solid orange acrylic, then it's crushed up before putting back into a mold. Once the crushed pieces are placed in the mold, it's filled again with the solid orange. Once it cures, you have a solid piece of material with the crushed pattern. It creates a very vibrant color, so it's a very popular pattern. You'll see several other colors used on my pens (the Cranberry Red, and Sapphire Blue are two).

This Pens Specifications:
Color / Material: Orange-Crush Acrylic Acetate.
Length: Capped 4.95" / Uncapped 4.61".
Diameter: Barrel .47" / Cap .58".
Nib: 2-Tone Steel #5 Meister.
Clip: Nickel plated steel.
Filling System: C/C.
It can also be ordered as a Button-filler.