Member:
IAP
FPN
FPB

HOMEPAGE

 

 

Custom Clipless Nazca Fountain Pen - in Crushed Shell Acrylic.

(Click each photo for larger views)

Crushed Shell Clipless Nazca (capped) Crushed Shell Clipless Nazca (uncapped) Crushed Shell Clipless Nazca (close-up) Crushed Shell Clipless Nazca (uncapped-2) Crushed Shell Clipless Nazca (close-up-2)

 



A
bout the Nazca:
The Nazca is named after the flat-top mountains of the Nazca Valley in Peru. Although Nazca is actually the name of the VALLEY rather than the mountains (the theme I usually use for naming my pens), I thought Nazca was an appropriate name for this "Flat-Top" style pen. Historical buffs and Sci-Fi fans will know of the famous Nazca 'Lines' found scattered across the tops of the flat mountains of Nazca, as well as the many odd shaped skulls found in the region with elongated craniums. So the exceptionally tall finial on this pen is a reference to the famous skulls, while the upgraded rings on the finial pays homage to the Nazca lines.

Nazca Dimensions:
The full size Nazca has an overall length of about 6", but it can be ordered in a smaller size I call the Nazca JR that can be ordered in lengths as short as 5", and fitted with a smaller #5 nib. The most prominent feature of the Nazca is the tall finial. As with most other JEB's PENs, the Nazca can be ordered in any of the materials shown or you can choose your own material to make the pen unique. The pen can be ordered clipless or with your choice of clip finishes (nickel, chrome, 24k gold, or gunmetal). The standard Nazca has a Cartridge/Converter (C/C) inking system, or upgrade it to a button or piston filler. If you prefer eyedroppers, it could be ordered with a special rubber o-ring that would seal the section to the barrel so it can be filled directly with ink. It can be ordered with either a #5 or #6 nib. Nib finishes are 2-tone, polished steel, Black Oxide (#6 only), or Ruthenium (#5 only). Current tip sizes are fine, medium, broad, and italic and 1.1 and 1.4 (#5 only) or 1.5 (#6 only).

Nazca Options and Upgrades:
The Nazca can be ordered with one of two different types of threads. The more typical 3-start threads, or a more coarse looking single start. Both types of threads have their advantages. The advantage of the 3-start threads is that they allow the pen to be capped with less turns, while the single-start threads allow more turns in a shorter length of the threads, so they threads can be much shorter and give the same amount of turns. Upgrades to the pen include metal accent bands at various location. You can add just one to the rear of the section for just a little touch of flash, or add at the end of the barrel (using a threaded blind-cap). The cap posting shown on some pens is also an upgrade, so if you prefer to post your cap, please let me know so this can be added to your pen. The ultimate upgrade is to add a group of three bands to the finial for a pen I call the Nazca LINES.

I also offer a variety of hand-made Pen Props and Pen Buttons. You can order a Pen Prop in a material to match your pen, or any one of the wooden styles made in a variety of stained and dyed colors. The Pen Buttons are available for any of the clipless pens.


About this Pen:
This pen is made as a CLIPLESS. Since the cap doesn't require a clip, they're made in one piece. The threads on this pen are also of a different style than is usually used on a pen. The threads are coarse, single-start. The advantage of the single start threads is that it allow the pen to be capped with a lesser number of threads allowing the threads to be a shorter length. Although the thread style is coarse, the thread themselves are smooth-- the peaks are rounded, and they are polished along with the rest of the pen so they are smooth to the touch. The pen uses a #6 nib and is a cartridge/converter (C/C).

About this Material:
This material is an Acrylic Acetate called "Crushed Shell". As you can see, it's so called because of the color and pattern. The pattern is called CRUSH because it's made up of small "crushed" pieces of acrylic. It's made by first making a batch of solid color acrylic. Then it's crushed up before putting back into a mold. Once the crushed pieces are placed in the mold, it's filled again with another solid color. Once it cures, you have a solid piece of material with the crushed pattern. It creates a very vibrant color, so it's a very popular pattern. You'll see several other colors used on my pens. Some use the same color for both the base and the crushed chips, (like the Orange, Cranberry Red, and Sapphire Blue), while others such as this Crushed Shell use two different colors.

Crush Shell Clipless Nazca Specifications:
Color / Material: Crushed Shell Acrylic Acetate.
Length - Capped = 6.0" / Uncapped = 5.25".
Diameter - Barrel = .57" / Cap = .62.
Nib - Polished Steel Meister.
Filling System: C/C.
It can also be ordered as a button or piston filler.